CoolingMist CMGS Stage 1 (Boost Switch)

Starting at: $279.95USD

Please Choose:

WMI Tank Included?

Add to Cart:

** The price for this kit includes free shipping within the continental USA**.
Stratified Notes:
This Stage 1 WMI kit is an excellent choice for cars running a stock turbo. It is for engines that don't rely heavily on Methanol injection to keep temperatures and mixture within acceptable range. With this kit, you'll see imrovements in cylinder temperature and a higher resistance to lower octane.
The coolingmist stage 1 kit has been re-designed from the ground up to give you the highest performing stage 1, while adding simplicity. The pump has been improved from our 1.0 GPM pump to the 1.3 GPM. The kit now comes with a solenoid with built in fittings and the standard nozzle has been replaced with the super atomizing nozzle. This kit is complete with your high pressure tubing, boost line, boost tee, boost switch, solenoid with built in fittings, fitting for your tank, pump, screws for pump, connectors for boost switch, wiring, super atomizing injector, new injector holder with built in fitting.
Why Do I Need WMI? 
Depending on where you are in your modifications path your need for WMI will change. Primarily there are three major benefits that a WMI system provides:
1) Cooling the Intake Charge: As the Water-Methanol mixture is sprayed into your intake, it absorbs energy from the hot air. Since energy and heat are one in the same, the result is a cooler intake charge which basically benefits every aspect of a modified car. Cooler air means lower cylinder temperatures and denser air, with lower cylinder temperatures the vehicle is less likely to knock. You can read more about the benefits of cooling the intake charge here:
2) Increased Octane: Aside from supressing knock by lowering the temperature of the incoming air, water-methanol injection goes one step further to keep knock at bay. By injecting methanol you are taking advantage of methanol's high octane rating, and this gives a result similar to that of mixing E85 in your tank. If you live in one of the many areas with less than optimal fuel, WMI is an excellent choice for getting the most from your modifications. 
3) Increased Fueling: Both the Mazda DISI and Ford EcoBoost motors feature high pressure direct injection fuel systems. These systems are great for efficiency but finding injectors and replacement pumps is often very hard or impossible. Both cars can be taken to around 400whp before hard to find or expensive fuel components are needed. In order to get past these power levels, you will need an external fuel source and Water-Methanol injection is the simplest method to get this fueling while also increasing cooling and octane. 
Below is a comparison of how much power we were able to safely gain by adding the WMI kit to our GTX2867 powered Focus ST on the stock fuel system and 92 octane pump fuel. You will need tuning to take advantage of the WMI system and we are more than happy to help you out with that!. Just Contact Us!
For ultimate safety we recommend pairing your Coolingmist Failsafe with a Statified Guardian Angel. By connecting the Guardian Angel trigger wire to the Coolingmist Failsafe trigger your motor will be saved from a WMI system failure. This is especially important if you rely on your WMI system to provide fueling or if your tune is too aggressive for the base fuel.
**If order needs to be shipped outside of the USA, additional shipping charges will be calculated and added after the purchase**



  • Model: CoolingMist WMI 1
  • Shipping Weight: 3kgs
  • 6 Units in Stock

This product was added to our catalog on Monday 27 July, 2015.