Fiesta ST PumaSpeed X47R Hybrid + Custom Tune Package

Starting at: $2,200.00USD

Please Choose:









Sold Out

We are a retailer for PumaSpeed products, this allows us to offer you BOLT ON X series turbos kits packaged with tunes resulting in big savings for your big turbo projects

 

This package includes Stratified Full Custom tune with the X37 or X47 bolt-on turbo kit of your choice.

 
 
 
Required for Hybrid Turbo Kit: 
  1. A Cobb Accessport to tune engine

These are stock frame hybrid turbos. This means that they are bolt-on replacements with minimal modifications. We include all the parts you need to bolt this on your vehicle. Intercooling, exhaust, and intake modification enhance the overall performance of the vehicle and we recommend these but they are NOT a requirement to run this turbo upgrade.

Included with each turbo:

- Big bore intake elbow.

- Turbosmart wastegate actuator.

- Exhaust manifold to turbo, turbo to downpipe, and oil drain gaskets.

- No core exchange, you keep your OEM turbo.

 

 

Here are some of highlights of the PumaSpeed X47 Hybrid:

 
  • DIRECT BOLT ON STOCK FRAME UNIT
  • New 45mm Large Bore Turbine shaft with Clipped back blades
  • New 58.95mm (up from 56.56mm on the original X-47) Extended Tip 7 Blade Billet compressor wheel
  • CNC re-profiled compressor cover to match new X-47 billet alloy wheel
  • Motorsport Heavy Duty thrust bearing assembly
  • Modified Seal Plate to match hi-flow compressor wheel
  • Motorsport Specification Cut back turbine blades for high flow at high RPM
  • 330bhp (300 whp) capable
 
The brief was very simple, create a higher flowing stock frame charger that could crack the 300+whp (E-Fuels) barrier whilst still delivering the proven reliability of the 270 whp capable X-37.
The new turbo has the ability to spool to 14 PSI  at 1800 revs and to full Boost as low as 2200 revs,it will continue to flow and make power to just over 7500, that's a huge 5000 wide band of sheer pleasure.

Whats the Secret ?

The OEM Stock Ford turbo has one limiting factor, its was never designed to flow the amount of exhaust gases to produce north of 300 whp. All regular off the shelf exhaust shafts are either rated to 240 bhp and 290 bhp by the Borg Warner factory . To extract any more power from this KP39 unit you must either shoe horn another turbocharger into the standard exhaust housing or make a larger turbine shaft , we believed this larger shaft option to be the best and most cost effective solution. We looked into the packaging constraints of the small turbocharger and decided a 18%-20%  increase in diameter would still enable  the very near stock like spool but give a perfect amount of flow to generate the golden 300whp number up high. Another very important consideration is reliability the 45mm diameter turbine would leave enough metal in the exhaust housing to guarantee structural strength, any bigger and without serious long term track testing and hot to cold cycles we could not have guaranteed the Ford OE Housing structural integrity.
 
A unique custom designed shaft was commissioned, code named the C45, this new 45mm diameter unit was designed to replace the older and outclassed C39 39mm diameter blade set  previously used on the X-37 and X-27 Hybrids. The visual differences are quite astonishing, take a look below. The new expected flow rate is far superior
 
X- 47 shaft spec is 40.3mm expanding to 45mm.
 X- 37 shaft spec is 37.5mm expanding to 38.5mm.
Stock shaft spec is 32.3mm expanding to 38.5mm.
 
 
 
 
 
Not Content with just making the the massive flow increases on the exhaust side we set about making a minor change to the compressor side also.
 
OE Cast alloy wheel size 35.4mm tips 49.00mm base circle 46.00mm
X37 Billet alloy wheel size 41.0mm tips 54.53mm base circle 50.96mm
X47 Billet alloy wheel size 43.0mm tips 56.56mm base circle 53.00mm
 

 

 

Any further questions - please feel free to Contact Us.

**If order needs to be shipped outside of the USA, additional shipping charges will be calculated and added after the purchase

 

 

 

 


  • Model: FiST_X47_Turbo_Packge
  • Shipping Weight: 16kgs
  • 0 Units in Stock


Current Reviews: 1

This product was added to our catalog on Friday 02 June, 2017.

Customers who bought this product also purchased...