MazdaSpeed 3/6 BNR S4 Big Turbo + Custom Tune Package

Starting at: $1,500.00USD

Please Choose:













REFLASH to change:

STuned Crackles:





Add to Cart:

 
Free shipping within the continental USA!
 
We are very excited to announce our partnership with BNR Supercars products. This allows us to offer you turbos packaged with tunes resulting in big savings for your big turbo projects! 
 
This package includes the BNR bolt-on turbo kit featuring the BNR S4 GT30 turbo as well as a Stratified Full Custom tuneThe included tune is a single map tune for the fuel of your choice (91, 93, OR E85 blend), adding a second fuel map costs an additional $50.  
 
 
 
Big Turbo Prerequisites: 
 
1. The OEM 2 port EBCS cannot handle the needs of a bigger turbo. To properly control boost you will need a Three Port EBCV. We do not recommend running any mechanical boost controllers such as a manual boost controller. 
 
2. An upgraded BPV is neccessary to run a bigger turbo. The OEM BPV will crack open when surpassing 21 psi of boost pressure causing a loss in airflow and performance. This Article highlights the shortcomings of the OEM BPV. Contact Us if you'd like to include a BPV in your turbo order. 
 
3. A 3" or larger intake. OEM-sized intakes work well for the OEM MazdaSpeed turbocharger, however, they are inadequite for bigger turbos. Recommended is an intake with at least a 3" ID (Contact Us if you'd like to include an intake in your turbo order).
 
4. A 3 Bar MAP sensor. The OEM MAP sensor is only accurate to around 21 psi of boost. When tuning a big turbo we will surpass this figure so the 3 bar map sensor becomes necessary. BitWise makes a plug and play harness which makes this a very easy swap.
 
5. With great power comes great responsibility, protect your motor with a Stratified Guardian Angel. Although this is not neccessary to run a big turbo it is very wise to protect your investmet with the Stratified Guardian Angel. Over the years the GA has saved countless motors from dangerous overboost conditions. 
 
 
BNR Turbo Information:
 
This package includes an internally wastegated turbo that uses the T04E 76mm compressor wheel and has a flange designed as a direct-fit OEM replacement for your MazdaSpeed DISI motor (tuning and other supporting mods needed, READ THIS). The turbo included in this package is the BNR S4 which is good for up to 450WHP on the MazdaSpeed DISI motor. 
 
The BNR kits are a complete bolt-on turbo package for the MazdaSpeed platform and come with every single nut, bolt, and washer needed for install on your MazdaSpeed Vehicle.
 
Here are some of highlights of the BNR Turbo Kits:
 
-Custom T04E50 76mm compressor wheel
-CNC machined turbine and compressor housings
-GT30 CHRA (center housing rotating assembly)
-High performance thrust assembly
-GT30 turbine wheel
-Aftermarket adjustable wastegate actuator 16-27psi, set at 17psi crack pressure
-Balanced to or under .5 gram/in2
-Anti-Surge compressor housing
-3.5" compressor inlet and stock outlet
-Full set of replacement studs
-1 year warranty
 
 
 
**If order needs to be shipped outside of the USA, additional shipping charges will be calculated and added after the purchase.

Any further questions - please feel free to Contact Us
 

 

 

 


  • Model: MZSPD_BNR_S4_Package
  • Shipping Weight: 16kgs
  • 6 Units in Stock


This product was added to our catalog on Wednesday 18 November, 2015.