JBR Focus ST Hot Side Charge Pipe Kit


Add to Cart:


Stratified Notes:
Upgrading the Hot Side Charge Pipe to a unit with a larger diameter that uses silicone couplings with proper T clamps will prevent the hose from blowing off. This is something we struggled with above 25 psi.
The JBR Hot Side Charge Pipe Kit for the Ford focus ST is constructed out of 2.5" mandrel bent aluminum. We used up all the available space and created a hot side charge pipe that increases the diameter by 26% over the OEM. This translates into a significant increase in air flow to get that hot air exiting the turbo to the intercooler faster and cooled quicker.
Making the connections are our custom, 5-ply reinforced silicone couplers. These couplers will not expand under boost and are fuel and oil resistant. Keeping the couplers and piping firmly in place, we've included 19mm wide stainless T-bolt clamps. 
The end result is a kit that looks, fits and most importantly...Performs!!
- Designed and Manufactured in the USA
- Increased Air Flow
- Lower charge temps
- 1 Hot side charge pipe
- 2 silicone couplers
- 4 stainless T-bolt clamps
- Installation instructions are available in our support section
- Shipping is free in the US & our Hassle Free Lifetime Warranty is included
**If order needs to be shipped outside of the USA, additional shipping charges will be calculated and added after the purchase**





  • Model: Mk3_FoST_FST-CP-HOT
  • Shipping Weight: 3kgs
  • 6 Units in Stock

This product was added to our catalog on Wednesday 14 October, 2015.