CP-e xFlex Rear Engine Mount STAGE 1 Focus ST/RS

$139.00USD

Please Choose:

Durometer





Sold Out
 
 
 
 
 
 
 
Description:

- Billet CNC construction

- EPDM Bushing

- CNC lathed aluminum bushing spacers

- Stabilize the engine rotational movement

- 60A or 75A durometer options

- All necessary hardware included

Instead of placing all of the force on the center bushing pin, the load is distributed throughout the bushing with the CNC lathed aluminum spacers. This load distribution increases the effective stiffness of the bushing under engine loads allowing a lower durometer bushing to provide more stiffness.

cp-e goes a step further by using EPDM, a sort of rubber, bushing. Urethane begins to fail at temperatures as low as 200°F and generally the bushings need a higher durometer rating to hold together. The Focus rear motor mount is a perfect example of when not to use urethane. The location of the mount allows a large amount of heat to be transferred to the bushing. EPDM holds up to this heat, and doesn't begin to break down and fail. EPDM has a higher density than urethane, so the bushing can have a lower durometer rating while keeping high reliability and support. Why is that good? Higher durometer ratings transfer vibrations through the vehicle and into the cabin, raising the NVH (noise, vibration, & harshness) value.

Made in the U.S.A. and backed by the best Warranty in the industry.

 
 
 
 

 

 


  • Model: Mk3_FoST/RS_FDXM00001/2B
  • Shipping Weight: 2.5kgs
  • 0 Units in Stock


This product was added to our catalog on Friday 15 January, 2016.