Stratified Notes:
Flex fuel is one of the best upgrades you can make to a WRX. Ethanol's knock resistance opens up the opportunity for more power, and just as importantly more reliability, because a properly set up flex tune takes knock out of the picture.
The other big win is that you no longer have to worry about how you blend. The ethanol sensor reads the actual ethanol content in your tank and the tune adapts to it, whether you are on pump gas, a full tank of E85 or anything in between. No more measuring, mixing to an exact target or reflashing for a different blend.
That only works when the tune is set up correctly. We ProTune both the VA (2015-2021) and VB (2022+) WRX with flex fuel through the COBB Accessport - check out our Subaru ProTune.
Manufacturer's Description:
The COBB CAN Gateway Flex Fuel Kit offers true plug-and-play installation and allows for seamless integration of flex fuel for supported vehicles.
CAN Gateway
The included COBB CAN Gateway provides the means for aftermarket sensor data to be injected into your car's CAN system where it can be absorbed by the ECU and utilized in either a COBB Off The Shelf Map or custom calibration. The Gateway itself is constructed of billet aluminum encasing a precision manufactured PCB. A machined bracket allows for a straight-forward bolt-in installation on supported cars.
Vehicle Specific Harness
Each CAN Gateway Kit includes a vehicle specific wiring harness. The 2015-2017 and 2018-2021 WRX use different harnesses and are not interchangeable, so please select your year range from the drop down.
CAN Ethanol Sensor Kit
The CAN Ethanol Sensor Kit includes an ethanol sensor with mounting bracket, fuel lines with quick connect fittings, and a wiring harness that connects to the CAN Gateway.
Why?
The COBB CAN Gateway Flex Fuel Kit for 2015-2021 Subaru WRXs measures the ethanol content level of the fuel being pumped into your engine and then sends that data to the ECU to be used in an Accessport delivered Flex Fuel calibration.
Kit Includes:
• CAN Ethanol Sensor Kit
• CAN Gateway Module
• CAN Gateway Bracket
• CAN Gateway Harness (year specific)
Optional: CAN Fuel Pressure Sensor Kit (COBB 344750)
A plug and play solution when using the COBB CAN Gateway enabling users to monitor low side Fuel Pressure on a Custom Accessport monitor. Included in this kit is a 0-100psi Fuel Pressure Sensor, a bespoke quick-disconnect billet adapter, and a wiring harness that allows for plug-and-play installation with the COBB CAN Gateway.
Monitoring Fuel Pressure is vital on any vehicle, especially those that are asking more of their fuel system. As demand on a fuel system increases so do the consequences of a failure. Monitoring fuel pressure will alert users if there is a fault in the vehicle's fuel system. Add it from the drop down above.
Fitment:
• 2015-2017 Subaru WRX 6MT (USDM) - COBB P/N 343650
• 2018-2021 Subaru WRX 6MT (USDM) - COBB P/N 344650
• Manual transmission only - not for CVT or STI
This part is legal under the provisions of EPA's Anti-Tampering Policy (SEMA Garage Emissions Certification). NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY EMISSION CONTROLLED MOTOR VEHICLE.
**If order needs to be shipped outside of the USA, additional shipping charges will be calculated and added after the purchase.
Any further questions - please feel free to Contact Us.