Stratified Notes:
Turbocharged engines run hot. Getting more air through the intercoolers and out improves performance consistency during spirited and track driving.
As seen in our YouTube build series for our 911 Carrera T.
Pair them with the APR Carbon Fiber Intake System and our Porsche 911 ProTune.
Manufacturer's Description:
APR Carbon Fiber Intercooler Ducts for the Porsche 992 3.0T dramatically lower intake air temperature (IAT) by increasing air flow through the ambient air path of the intercooler cores. In doing so the engine makes more power and sustains power levels for longer, as IAT is kept away from the knock threshold of the engine and the IAT based power reduction routines of the factory ECU.
The ducts are made from carbon fiber, formed to the exact shape needed to fit the tight engine bay of the 992's rear end. The vents allow maximum flow through the system while still connecting to the rest of the factory ducting, and everything slides into place with no extra hardware.
APR tested on the street, not a dyno, to capture real world cooling data. Over ten back-to-back wide open throttle runs of roughly 11 seconds, IAT with the stock ducts rose to 66.2°C (151.2°F) - above the factory knock threshold of 60°C (140°F) and approaching the ECU power reduction limit of 70°C (158°F). With the APR ducts, IAT levelled off at 56.6°C (133.9°F): 9.6°C (17.3°F) or 15% lower than stock.
Specifications:
- Part number: APR IC100030
- Improves intake air temperature (IAT) by 15% over stock
- Organic matte carbon fiber design with gloss APR logo
- Lightweight, plug and play - no extra hardware required
- Retains the factory intercooler post-housing ducting
- Emissions compliant (does not affect emissions)
Fitment:
- Porsche 911 (992.1) 2020-2024 with the 3.0T engine: Carrera, Carrera S, Carrera 4, Carrera 4S, Carrera T, Targa
- Does NOT fit cars with the Porsche Design rear bumper (standard on the GTS, optional on other models)
**If order needs to be shipped outside of the USA, additional shipping charges will be calculated and added after the purchase.
Any further questions - please feel free to Contact Us.